Difference between revisions of "FAQ"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
If you use one of the 'CoT' [[Disk Images]], symlinks are automatically created in '/dev' that will allow you to identify each serial port: | If you use one of the 'CoT' [[Disk Images]], symlinks are automatically created in '/dev' that will allow you to identify each serial port: | ||
| − | * ''OpenUSB'': /dev/ttyOPENUSB | + | * '''OpenUSB''': <code>/dev/ttyOPENUSB</code> |
| − | * ''EZRUSB@433 MHz''/dev/ttyEZR433 | + | * '''EZRUSB@433 MHz''': <code>/dev/ttyEZR433</code> |
| − | * ''EZRUSB@868 MHz''/dev/ttyEZR868 | + | * '''EZRUSB@868 MHz''': <code>/dev/ttyEZR868</code> |
| − | * ''EFM32GG+LoRa'': /dev/ttyLORA | + | * '''EFM32GG+LoRa''': <code>/dev/ttyLORA</code> |
By referring to these symlinks instead of the /dev/ttyUSBX-devices directly you can be sure that you are talking to the correct device. | By referring to these symlinks instead of the /dev/ttyUSBX-devices directly you can be sure that you are talking to the correct device. | ||
| − | If you are not using one of the 'CoT' images, you can add the necessary udev-rules needed to to do by copying | + | If you are not using one of the 'CoT' images, you can add the necessary udev-rules needed to to do by copying <code>/etc/udev/rules.d/50-persistent-usb.rules</code> from one of the 'CoT' images to your own image. |
== How can I flash/erase the EZRUSB devices ? == | == How can I flash/erase the EZRUSB devices ? == | ||
Revision as of 13:07, 28 February 2018
How do I get access to the testbed ?
This is explained on the Getting Started page
Why are
I can't create links to/from nodes in the City of Things testbed in JFed.
How do I know which serial interface (/dev/ttyUSBX) is connected to what device?
If you use one of the 'CoT' Disk Images, symlinks are automatically created in '/dev' that will allow you to identify each serial port:
- OpenUSB:
/dev/ttyOPENUSB - EZRUSB@433 MHz:
/dev/ttyEZR433 - EZRUSB@868 MHz:
/dev/ttyEZR868 - EFM32GG+LoRa:
/dev/ttyLORA
By referring to these symlinks instead of the /dev/ttyUSBX-devices directly you can be sure that you are talking to the correct device.
If you are not using one of the 'CoT' images, you can add the necessary udev-rules needed to to do by copying /etc/udev/rules.d/50-persistent-usb.rules from one of the 'CoT' images to your own image.
How can I flash/erase the EZRUSB devices ?
How can I flash/erase the LoRa device ?
I have a question and I can't find the answer on the Wiki
Please send your question to . We'll be happy to help you along and update the documentation where necessary.